The short answer
For a useful first estimate conversation, describe what the fence must contain or exclude, sketch each run, give approximate lengths, mark gates, and photograph the existing line and access. Label guesses as approximate. A provider still needs to confirm the site, boundaries, suitable design and final measurements before quoting the work.
| Record | What to send | What still needs confirmation |
|---|---|---|
| Purpose | Animal types, use of each enclosure, and any specific containment problem. | Suitable fence design for the animals, property and surrounding wildlife. |
| Runs | A simple sketch with A, B and C labels and approximate length for each. | Final measurements and the agreed fence alignment. |
| Gates | Mark each gate, its current opening if known, and the vehicles that use it. | Gate dimensions, supports and hardware in the actual proposal. |
| Existing fence | Photographs of damaged sections, corners, posts and gates. | Which parts can remain and which require replacement. |
| Access | Entrance location, narrow passages, slopes and obstacles visible from safe ground. | Equipment access, ground conditions and any additional site preparation. |
Describe the job the fence must do
Start with the practical problem: a new enclosure, a failing boundary, a gate that will not close, or a repair to one section. Say which animals use the area and whether the work is permanent fencing or a limited repair. A description such as “replace the west pasture run and retain the two existing gates if suitable” is more useful than “need ranch fencing.”
Do not select wire spacing, fence height or an installation method from a generic checklist. A site-specific design needs to account for containment, terrain and wildlife. The Wyoming handbook linked below is useful background for the wildlife questions to raise with a provider. It is not a substitute for a boundary survey or a design for your property.
Make one sketch, then label each run
Draw the enclosure or line on paper and give each section a letter. Put approximate lengths beside those letters and mark every corner and gate. State how you estimated the distance; leave it unknown if you cannot measure safely.
Use a consistent unit and distinguish the length of fence from the width of a gate opening. Keep access notes separate from fence length. An estimate based on a rough sketch should say which dimensions will be checked before the price is final.
- Run A: purpose, approximate length, existing material and keep/repair/replace preference.
- Gate 1: location, current opening if known, and the equipment or animals that need to pass.
- Access: where a provider would enter and any visible obstacles along that route.
Photograph context as well as damage
From safe, accessible ground, take one wide view along each labelled run, a view of each gate and corner, and closer views of the problem areas. Pair the filenames or descriptions with the letters on your sketch.
A close-up of broken wire alone does not show how much work you want priced. A wide view and a note such as “Run B, damaged section near Gate 1” help connect the defect to the requested scope. Do not cross neighboring land, handle a hazardous fence or approach livestock simply to complete the checklist.
Ask for the same scope in each proposal
Ask whether the written price includes removing the old fence, retaining any existing posts or gates, hauling discarded material, site preparation and final cleanup. Where a contractor cannot confirm an item yet, ask for the assumption or exclusion in writing.
Confirm who will establish the authorized fence line before installation. A photo, old fence or online map does not establish a legal boundary. If the line or permissions are uncertain, resolve that before treating the proposed layout as agreed. This guide does not state fence-law or permit requirements.
A request you can adapt
“I am planning [new fencing / a repair] for [purpose and animals]. My sketch shows [runs] with approximate lengths in [units] and [number] gates. I would like the proposal to identify what can stay, what needs replacement, removal and disposal, gate work, and any access assumptions. Please confirm the layout and measurements before a final price.”
Use the farm and ranch fencing page to review the existing service scope, then send the basic details through the contact form. Describe the photos you have available; the form does not accept photo uploads. Coverage and the actual provider must be confirmed before scheduling.
Sources and scope
- Western Landowners Alliance: A Wyoming Landowner’s Handbook to Fences and Wildlife (third edition, 2025)
Background on wildlife considerations; not a fence specification or legal determination for a particular property.
Sources checked November 13, 2026. This editorial guide was prepared with AI assistance using the sources linked above. It is not a site inspection or a report of work completed by a local contractor.